Welcome! This is the documentation for Microhomie v1.0.0.
The main target device is the ESP8266 and we deliver pre-build firmware images. For ESP32 devices see the Install Microhomie on the ESP32 section.
Install Microhomie on the ESP8266¶
The first thing you need to do is to load the Microhomie firmware, a modified MicroPython firmware, onto your ESP8266 device. You can download the firmware from the GitHub release page.
If you just started with MicroPython, a good start is the Getting started with MicroPython on the ESP8266 from the MicroPython documentation.
To configure your Microhomie device create a
settings.py file from the
settings.example.py file, make your changes and copy the file to your ESP8266 device.
Get started with a simple LED node¶
The LED example in this guide use the on-board LED, so you don’t need to do any wiring to get started.
main.py file from the
examples/led directory to your ESP8266, reset the device and watch the incoming MQTT messages.
To turn the on-board LED from your ESP8266 on or off send
toggle to the property topic. For example:
mosquitto_pub -h HOST -u USER -P PASSWORD -t "homie/DEVICE-ID/led/power/set" -m true
Build your own Microhomie ESP8266 firmware¶
If you want to build your own Microhomie firmware, maybe for helping us with development, learning or just for the fun to build your own firmware, follow the next steps.
First clone the Microhomie repository:
git clone https://github.com/microhomie/microhomie.git
The next step is to setup the build environment, build the esp-open-sdk (Requirements and Dependencies), get the MicroPython source, prepare it for the Microhomie firmware and download the required MicroPython modules:
cd microhomie make bootstrap
Now you can build your Microhomie firmware and load it to your ESP8266:
Erase and flash:
make delpoy PORT=/dev/ttyUSBX
make flash PORT=/dev/ttyUSBX
If you want to help with development, please use our linting:
Install Microhomie on the ESP32¶
For the ESP32 you can just copy all requirements and Microhomie to your device.
Flash MicroPython to your your ESP23 with the official the Firmware for ESP32 boards.
Clone the Microhomie repository and get all the requirements.
git clone https://github.com/microhomie/microhomie.git make requirements
The requirements will be downloaded to the path
homie from your host to the device.
homie should be copied to the device
lib directory too:
lib/ ├── aswitch.py ├── asyn.py ├── homie │ ├── constants.py │ ├── device.py │ ├── __init__.py │ ├── node.py │ ├── property.py │ └── utils.py ├── mqtt_as.py └── uasyncio ├── core.py └── __init__.py
For example we have an mpfshell script
esp32_install.mpf to automate the delpoyment:
mpfshell ttyUSB0 -s esp32_install.mpf